Industrial
Hygienic
Instrumentation

 

Hygienic / Alfa Laval / Sanitary Valves and Automation Items / Regulated Valves / SPC-2 Regulating Valve

SPC-2 REGULATING VALVE

IMPLEMENTATION
SPC-2 is a hygienic electro-pneumatic regulation valve for use in applications where main elements such as tank pressure, flow, temperature and level require sensitive controlling.

OPERATION PRINCIPLE
The valve is controlled remotely with electrical signal and pressurized air. IP converter which is an integrated part of the actuator converts electrical signal into pneumatic signal.  It is resistant to signal conversion and sudden changes in pressure. Pneumatic signal is transmitted to the integrated positioner which runs on the power-balance principle and ensures that actuator piston is directly proportional to the input signal. Signal range and zero point can be set independently. Actuator can be used for standalone sequential operation using a different measuring spring.

STANDARD DESIGN
The valve body consists of valve plug, gasket, head and external actuator. Headed actuator is connected to the valve body via a clamp. Since all moving parts are inside the actuator, it is protected against external damage and foreign materials. Actuator contains few number of moving parts and two main actuators cover all valve sizes.








TECHNICAL DATA 

Valves
Max. Product Pressure ................................. 1000  kPa (10 bar)
Min. product pressure ................................... Full vacuum
Temperature Range ...................................... 10 °C to 140 °C(EPDM)
Flow range Kv(Δ P = 1bar)............................ 0,5 to 110 m3/h
Max. Pressure Fall........................................ 500  kPa (5 bar)

Actuator
Air Fitting....................................................... 6/4 air pipe, R1/8 inch (BSP) air
Max. Pressure .............................................. 600 kPa (6 bar)
Operating Pressure ...................................... 400  kPa (4 bar)
Max. Particle Size......................................... 0,01 mm
Max. Oil Content .......................................... 0,08 ppm.
Condensation Point ..................................... Begins at 10 °C below ambient temperature
Max. Water Content...................................... 7,5 g/kg
IP Converter Signal Range .......................... 4 - 20 mA
Input Resistance .......................................... 200  Ω
Induction/Capacity ....................................... Ignorable


PHYSICAL DATA 

Valves
Materials that come
into contact with the product................... 1.4404 (316L)
Other Materials ...................................... 1.4301(304)
Product Contact Gaskets ....................... EPDM

Actuator
Actuator Cases……............................…..Plastic Coated Aluminum
Actuator Shaft ......................................... Polyamide
Diaphragm .............................................. Reinforced NBR Screws, Nuts......................................................... Stainless steel, polyamide.
Other Parts ............................................. Stainless Steel
Springs ................................................... Spring steel is coated with epoxy resin.









                                            Capacity Diagram
Deviation Values
Deviation .............................................................. ≤1,5%
Latency ................................................................ ≤0,5%
Precision .............................................................. <0.1%
Impact of Air Supply Pressure ............................. 1,4 to 6 bar, ≤0,1%
Air Consumption in Stable Condition ................... With 0,6 bar signal pressure and
                                                                               supply pressures up to 6 bar ≤100 I/h
Ambient Temperature .......................................... -25 °C to +70 °C
Protection Class ................................................... IP 54






















                                                Test Product: Water (20 °C)



DIMENSIONS
Normally Open (NA)
Normally Closed (NK)


Flow Dimensions / Pipe Fittings 


Kv stands for flow rate in m3/h in a 1 bar pressure decrease when the valve is completely open (20 °C water or similar liquids). To choose the Kv value, the Kvq value should be calculated with the following formula:


               Kvq=    Q   
                           ΔP


   Kvq   = Kv value in a specific flow or specific pressure decrease
   Q      = Flow rate (m3/sa.)
   ΔP    = Pressure decrease in the valve (bar)



Product Code: 5282

(*) E= Equally, L= Linear

Notice: Undefined index: show in /var/www/vhosts/borsenboru.com/borsen_app/views/footer.php on line 67